Calculating Your Hat Size:
To calculate your metric (European) hat size a measurement of the head circumference should be taken in centimetres. This is best achieved by passing a cloth tape measure around the head.
Alternatively a piece of string may be used and measured against a ruler or tape measure. It is important that this measurement is taken where a hat would normally rest.
To take a measurement position the tape measure or string so that it rests just above the brow at the front of the head, touching the top of the ears at the side. Pull the tape so that it is taut but not too tight and take a measurement.
Hats are sized to the nearest whole centimetre so it is advisable to size up if your head falls between two measurements.
|
British (inch) |
U.S. (inch) |
European (cm) |
|
|
6 5/8 |
6 3/4 |
54 |
S |
|
6 3/4 |
6 7/8 |
55 |
S |
|
6 7/8 |
7 |
56 |
M |
|
7 |
7 1/8 |
57 |
M |
|
7 1/8 |
7 1/4 |
58 |
L |
|
7 1/4 |
7 3/8 |
59 |
L |
|
7 3/8 |
7 1/2 |
60 |
XL |
|
7 1/2 |
7 5/8 |
61 |
XL |
|
7 5/8 |
7 3/4 |
62 |
XXL |
British hat sizes are given in an imperial measurement of the diameter of the head in inches. Sizes usually range from 6 1/2 to 8.
North American hats use the imperial scale however measurements are an eighth of an inch larger than British hats for the same size hat.
European hat sizes use the metric sizing standard which is a measure of head circumference given in centimetres. Metric sizes usually range from 54 - 62.
